La ricerca ha trovato 34 risultati
- venerdì 19 agosto 2005, 17:49
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
yes, it's better to start with another new back. You can try to fix the old back, of course, but there is not an exact process. You have to try different possible solutions. First, fix the precision clamps at the heads of the back, then you apply the clamps in the above photo. Remember: the new joi...
- venerdì 19 agosto 2005, 16:41
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
Re: good news and bad news
I thought this will not be a repair difficulty because it should be a common problems for the old instruments which the plate will be split after certain years. Now I know I might be in deep troubleby the words from you a professional maker. do you think the tool in the picture will do the job? htt...
- martedì 19 luglio 2005, 16:49
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
clamp
thank you, I have one of them, a cheaper version, not working very well. I could actually use rubber band on button part. I will let you know if I have any difficulty to fix it. Yes, I thought 1 to 4 glue was OK, it turned out to weak, will get back to 1 to 2 when I regule the back.
- martedì 19 luglio 2005, 4:51
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
pciture of the special clamp
Could you show the picture of special clamp I will need?
- lunedì 18 luglio 2005, 23:39
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
good news and bad news
I thought this will not be a repair difficulty because it should be a common problems for the old instruments which the plate will be split after certain years. Now I know I might be in deep troubleby the words from you a professional maker. do you think the tool in the picture will do the job? http...
- lunedì 18 luglio 2005, 21:10
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
Weak glue or bad joint?
The plate separated while I was working on hollowing. What is your opinion? Is the plate rescuable? and what kind of tool I will need?
thanks in advance for the advice.
thanks in advance for the advice.
- martedì 12 luglio 2005, 15:39
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
- martedì 12 luglio 2005, 7:52
- Forum: Stringed Instruments International
- Argomento: BC carving board
- Risposte: 16
- Visite : 18665
BC carving board
Claudio, I got the BC carving board a couple months ago, a very useful tool, and the ball clamp quite stable with no problem so far. However, I am about to start to dig out the back, found out it could not fit well on the board. The question is do you revised the board and make it deeper to accomoda...
- lunedì 13 giugno 2005, 23:30
- Forum: Stringed Instruments International
- Argomento: How to achieve
- Risposte: 3
- Visite : 7186
- lunedì 13 giugno 2005, 21:59
- Forum: Stringed Instruments International
- Argomento: How to achieve
- Risposte: 3
- Visite : 7186
How to achieve
Claudio, I am restart my first violin, and upto the point that I am struggling with the Ciresa maple, which is very hard wood to carve, and I saw your work on other thread that it seems you have a very easy time on carving the back with big smooth stroke which proof by the picture. Wondering what is...
- venerdì 10 giugno 2005, 2:33
- Forum: Violini
- Argomento: Il violino nuovo.
- Risposte: 320
- Visite : 578449
- venerdì 10 giugno 2005, 0:53
- Forum: Violini
- Argomento: Il violino nuovo.
- Risposte: 320
- Visite : 578449
- venerdì 10 giugno 2005, 0:30
- Forum: Violini
- Argomento: Il violino nuovo.
- Risposte: 320
- Visite : 578449
- giovedì 5 maggio 2005, 7:37
- Forum: Stringed Instruments International
- Argomento: Opened C bouts
- Risposte: 7
- Visite : 9339
Wah, this is the first time I ever know I could use the ratio of 1:4 for the hide glue. I definitely use that for the top. How about later on neck and fingerboard? Claudio, could this too thick the glue affect the tone? and what do you suggest for inside coating? that is to say what kind of coating ...
- mercoledì 4 maggio 2005, 23:09
- Forum: Stringed Instruments International
- Argomento: Opened C bouts
- Risposte: 7
- Visite : 9339
Thanks Claudio.
I mounted the back Sunday night, removed the mould last night. the tiny opening hole seems ok at this stage.
Should I remove the glue in and outside of the box? How if the answer is yes?
[img][img]http://i5.photobucket.com/albums/y177/t ... ack504.jpg[/img][/img]
I mounted the back Sunday night, removed the mould last night. the tiny opening hole seems ok at this stage.
Should I remove the glue in and outside of the box? How if the answer is yes?
[img][img]http://i5.photobucket.com/albums/y177/t ... ack504.jpg[/img][/img]